2020 PORSCHE MACAN

The auction records identify the vehicle as having a “CERTIFICATE OF TITLE” condition and list the primary damage as “FRONT END.” Stage 1 reports that the visible photos support the FRONT END classification through extensive front-end damage. The CERTIFICATE OF TITLE condition cannot be confirmed from the vehicle photographs. The front hood is severely creased and deformed across its forward section, with the leading edge raised and uneven above the grille and headlamp areas. The front bumper assembly and central grille have multiple cracked, displaced, and missing-looking sections, while the lower bumper area is visibly separated and damaged across the front. The left front fender is moderately deformed around the wheel arch and front tip, with uneven panel gaps and exposed attachment areas. The bumper and fender also separate at the front-left junction, leaving panel edges and attachment points exposed. The driver’s steering-wheel airbag is visibly deployed, with the cover open and white fabric hanging from the steering-wheel center. A second deployed airbag is visible in the driver’s lower dashboard or knee area. These findings indicate substantial collision-related damage and likely require inspection of the associated restraint, structural, electrical, and cooling-system components before repair or road use. The left rear bumper has minor cosmetic scuffing, paint transfer, and localized paint loss. No clear deformation of that bumper is visible in the provided finding. The instrument cluster displays “Reduced engine power — Consult a workshop,” along with multiple warning indicators. The photographs do not establish the underlying mechanical or electrical cause, so this should be treated as a significant diagnostic concern requiring further inspection. The provided recall records list two applicable Porsche campaigns for this model-year range. Recall 22V656000 concerns missing low-beam headlight adjustment-screw sealing caps, which may result in improperly adjusted headlights; the remedy is inspection and installation of the caps if necessary. Recall 23V443000 concerns potentially loose lower rear outboard seat-belt anchor screws; the remedy is replacement and tightening of the anchor screws. Recall completion should be verified by VIN with Porsche or an authorized dealer.