2017 PORSCHE 911 CARRERA/CARRERA 4

The vehicle is listed with an auction condition of Salvage and a primary damage classification of Front End. Stage 1 reports that the visible front-end damage—including the deformed hood and missing front bumper grille/trim—supports the unverified Front End classification. However, the Salvage condition cannot be independently confirmed from the available photos. The front hood is visibly raised and uneven, with widened and irregular gaps above the bumper and deformation near the left headlamp and front edge. Several scratches and scuffed areas are also visible across the hood, including a more pronounced scuffed area toward the front left. The lower front bumper grille or trim insert is missing, exposing internal components and mounting points. An additional irregular opening or trim gap is visible below the left headlamp, with unfinished inner surfaces exposed. Light scratches and scuffing are present on the front bumper as well. The VIN decodes as a 2017 Porsche 911 coupe, manufactured by Porsche in Stuttgart-Zuffenhausen, Germany. The decoded specifications identify a 3.4-liter, six-cylinder gasoline engine and left-hand drive; the available data also lists 350 horsepower. Drivetrain and transmission details are not provided in the decode. NHTSA records show recalls for certain 2017 Porsche 911 vehicles involving the air-bag control module (19V533000) and seat-mounted side-air-bag inflator initiators (16V946000). These should be checked against the vehicle’s service records and VIN to confirm completion. A separate windshield-bonding recall (17V135000) is listed for specified 2017 911 convertible and Targa variants; applicability to this coupe should be verified with Porsche. A physical inspection is recommended to assess the hood, bumper structure, mounting points, lighting, and any damage behind the visible exterior panels.