2022 MERCEDES-BENZ SPRINTER 907 (VS30)

The auction record lists the vehicle with a “CERTIFICATE OF TITLE (P)” condition and “FRONT END” as the primary damage classification. These are unverified auction designations. Stage 1 reports that the visible evidence supports the FRONT END classification through the extensive missing and damaged front-end components; the CERTIFICATE OF TITLE (P) condition cannot be confirmed from the photographs. The front end has severe visible collision damage. The grille, both headlamp assemblies, and the front bumper cover are missing, exposing the radiator, condenser area, wiring, brackets, and other internal components. The bumper reinforcement is visibly bent and uneven, while plastic mounting structures and surrounding components at both front corners are broken, displaced, or incomplete. The front-left corner has missing outer body components and exposed brackets. The hood is deformed at the front-right corner and leading edge, with extensive scraped paint and exposed underlying material. The front-right wheel-arch trim and outer components are missing, exposing the inner wheel well and suspension-side area. The wheel-well liner is torn, displaced, and incomplete, with loose material hanging near the tire. At the rear, the lower left quarter panel around the rear wheel is severely crushed and creased, with scraped paint, exposed metal, and an irregular lower edge. The lower outer corner of the left rear door is deformed and scraped, with exposed brown-colored material adjacent to the damaged panel. A section of lower side trim is missing, leaving mounting holes and unfinished panel edges visible. Minor scuffs and discoloration are present on the rear doors and adjacent left rear body surfaces. Detached front-end components, including large plastic pieces and lamp-like assemblies, are stored loose in the cargo compartment. According to the NHTSA VIN decode, this is identified as a 2022 Mercedes-Benz Sprinter 2500 (VS30) cargo van with 4x2 drive, a 2.2-liter OM651 diesel engine, and a 170-inch wheelbase. The vehicle is listed as manufactured by Mercedes-Benz AG in the United States. The decoder includes a note that the model year may require reconfirmation, despite returning 2022 for this VIN. The visible findings do not establish the condition of hidden structural, cooling, electrical, mechanical, restraint, or alignment-related components. A comprehensive physical inspection and functional testing would be required before purchase.