2020 MERCEDES-BENZ SPRINTER 907 (VS30)

The vehicle is listed with a Certificate of Title (P), and the auction identifies the primary damage as rear end. Stage 1 reports that the visible lower rear-door dents, deformation, and paint abrasion support the stated rear-end damage claim, although the photographs do not establish the full extent of the damage. The Certificate-of-Title status cannot be confirmed from the photographs. Visible damage is concentrated on the lower rear cargo doors. Both doors show moderate creasing, dents, irregular deformation, chipped paint, and dark scrape marks along the lower edges and seam. The lower center area also has a shallow but irregular dent with surrounding paint abrasion. The complete condition of the doors, hinges, latches, seals, and adjacent rear structure should be checked in person. Minor cosmetic wear is visible inside the cabin. The driver-door pull and lower trim have scuffing and surface wear, while the driver’s seat cushion and outer bolster show creasing and wear without a visible tear. According to the VIN decode, this is a 2020 Mercedes-Benz Sprinter 2500 cargo van with left-hand drive, rear-wheel drive/4x2 configuration, a 3.0-liter OM642 diesel engine, and a 170-inch wheelbase. It was manufactured in Charleston, South Carolina, USA. The decoded equipment includes ABS, electronic stability control, traction control, direct tire-pressure monitoring, adaptive cruise control, pedestrian automatic emergency braking, and a rear-visibility system. Further physical inspection and mechanical testing are recommended before purchase.