2020 MERCEDES-BENZ S 560 4MATIC

The auction lists the primary damage as rear damage. Stage 1 reports that the visible evidence supports this claim, with extensive damage concentrated around the trunk, rear body, bumper, rear window, left rear quarter panel, lamp, and lower rear components. This is an auction classification and should still be verified through a physical inspection. The vehicle has severe collision damage across the rear. The trunk lid is extensively crushed and folded, and the metal around the trunk opening and rear body panel is torn, buckled, and irregular. The rear bumper assembly and lower valance are heavily fractured, detached, and hanging below the vehicle. The left rear quarter panel and rear corner are deeply crushed, including the area above and forward of the rear wheel. The left rear tail lamp is broken and displaced, with internal components exposed. Exhaust and other lower rear components are visibly displaced, with detached parts hanging beneath the vehicle. The rear windshield is extensively shattered. Inside the trunk, the carpeting and trim panels are pulled out of position, torn, broken, and hanging into the damaged opening. In addition to the rear damage, the left side of the front bumper has broken lower trim, including a separate black-and-silver piece hanging outward. The VIN decodes as a 2020 Mercedes-Benz S-Class sedan, S560-4M trim, built in Germany. It is equipped with a turbocharged 4.0-liter gasoline V8 engine, a nine-speed automatic transmission, and 19-inch wheels. The decode identifies the engine as the M176 and lists an output of 463 horsepower. NHTSA records list four recalls associated with the 2020 S560: two concerning software for the emergency-call communication system, one involving side-impact crash sensor connectors that could delay airbag and seatbelt activation, and one involving possible fuel-rail and injector leaks. The applicable repair status for this vehicle should be confirmed by VIN with Mercedes-Benz or an authorized dealer. Given the extensive deformation around the trunk opening, rear quarter panel, rear body structure, bumper, exhaust area, and rear glass, a comprehensive inspection is recommended before purchase. This should include the rear body structure, trunk alignment, lighting and wiring, exhaust system, safety restraint systems, airbag sensors, possible water entry through the broken rear window, and the operation of all affected electronic systems.