2022 MERCEDES-BENZ S 500 4MATIC

The auction record lists the vehicle as having a “Clear” condition and identifies the primary damage as “Front End.” Stage 1’s photo-based assessment supports the Front End damage classification: the bumper, headlamps, grille, cooling components, and related front-end parts are absent or removed. Stage 1 also finds that the “Clear” condition claim is contradicted by the extensive visible front-end disassembly and missing components. The visible damage is concentrated at the front of the vehicle. The front bumper cover and associated fascia are missing, leaving structural and mechanical components exposed. Both headlamp assemblies, the grille, and center fascia components are absent. The front cooling-module area is open, with the radiator and heat-exchanger components missing from their installed position. Multiple wiring harnesses, connectors, hoses, and mounting components are exposed or hanging in the lower front engine-compartment area. A separated front bumper assembly, lighting components, a cooling-module component, underbody panels, wheel-well liners, and other front-end trim pieces are visible on the ground in front of the vehicle. The lower rocker-panel trim is also missing on both the left and right sides, exposing the mounting clips and underlying edges. Based on the VIN decode, this is a 2022 Mercedes-Benz S-Class S 500 4MATIC sedan with all-wheel drive, a 3.0-liter six-cylinder gasoline M256 engine, and a nine-speed automatic transmission. The vehicle was manufactured in Germany. Several NHTSA safety recalls are listed for this make, model, and year. They include fuel-pump shutdowns that may cause a loss of drive power (23V445000 and 23V880000), communication-module software that may restrict or disable the emergency call system (21V00J000), and front brake hoses that may rupture and leak brake fluid (25V116000). The repair status for this specific vehicle should be confirmed with Mercedes-Benz or an authorized dealer using the VIN. Given the missing front-end and cooling components, a complete structural, mechanical, wiring, safety-system, and electrical inspection is required before repair or operation.