2013 MERCEDES-BENZ ML ML350

The vehicle is listed with a salvage certificate and an auction primary-damage designation of “ROLLOVER.” The provided assessment supports significant left-side collision damage, windshield cracking, and deployed curtain airbags, but states that the rollover claim is not confirmed by the visible evidence. The salvage-certificate status also cannot be verified from photographs. Damage is concentrated along the left side. The left front door has moderate creasing and deformation along its front edge and lower-to-middle area, with an uneven gap at the adjacent front fender. The left rear door is severely deformed across the lower and middle sections, with multiple sharp creases and scraped areas. The left rocker panel and lower door sill are severely crushed and heavily creased, with damaged coating and exposed dark areas along the lower edge. The left rear quarter panel has moderate scuffing, creasing, and deformation around the lower section and front portion of the rear wheel arch. The windshield has extensive branching cracks across the upper and central areas. Curtain-airbag fabric is hanging from the left roof-side area above both door openings, with additional deployed airbag material visible near the rear interior roof opening. These restraint-system components will require professional inspection and likely replacement, along with evaluation of associated sensors and safety-system components. The hood has numerous linear scratches and abrasion marks. The outer lower bolster of the left front seat shows minor upholstery wear. VIN decoding identifies this vehicle as a 2013 Mercedes-Benz ML-Class ML350 SUV, manufactured in the United States. It is equipped with a 3.5-liter gasoline V6 engine; the decoded data does not specify the drivetrain or transmission. A thorough inspection of the structure, rocker panel, suspension, wheel-arch area, glass, airbag system, electrical systems, and mechanical condition is recommended before purchase.