2017 MERCEDES-BENZ METRIS

The auction record describes the vehicle as “GRAVEMENT ACCIDENTE” (severely accident-damaged) and lists the primary damage as “MECHANICAL.” The accompanying photo-based assessment reports moderate localized body-panel deformation on the right side and minor deformation to the rear doors, but does not visibly support a severely accident-damaged or structural condition. The mechanical damage classification cannot be confirmed from exterior photographs and requires a physical inspection. The vehicle is identified as a 2017 Mercedes-Benz Metris cargo van with 4x2 drive, a gasoline M274 engine, and an approximately 6,001–10,000 lb GVWR class. The VIN decode lists Spain as the manufacturing country and notes that the VIN check digit is valid. The decoder also cautions that the model year may require reconfirmation. Exterior damage is concentrated on the right side. The right sliding door has a pronounced inward dent and horizontal crease in its lower middle section, extending through and disrupting the blue exterior stripe. The lower right front door and adjacent rocker-area panel show visible inward deformation and creasing. Light linear scuffs and dirt marks are present along the right rear side panel and lower side molding near the sliding-door area. The lower right rear cargo-door area has shallow dents and localized panel waviness. The interior shows minor cosmetic wear. The driver’s seat has worn and torn upholstery on the outer lower bolster, with lighter-colored material exposed. The visible front cabin floor mats and portions of the seating surfaces have substantial dirt and discoloration. The visible steel wheel has extensive surface rust and corrosion discoloration. The supplied NHTSA recall records identify multiple campaigns for this model and year, involving the driveshaft securing bolts, emergency-call communication software, the auxiliary battery compartment cover, electric power steering, fuel hoses and connections, the transmission support, the passenger air bag, front wheel bearings, blind-spot monitoring equipment, brake-fluid reservoir mounting, the rearview camera, and tire/load-capacity labeling. Recall completion should be verified by the VIN with Mercedes-Benz or an authorized dealer before purchase. A physical inspection should also assess the right-side door and rocker-area damage, possible hidden structural or mechanical issues, wheel and suspension condition, vehicle operation, and the condition of the interior and safety systems.