2020 MERCEDES-BENZ GLS GLS450-4M

The auction record lists the vehicle as having a salvage title and identifies the primary damage as “FRONT END.” Stage 1 reports that the visible severe front-end collision damage supports the stated primary-damage code; however, salvage-title status cannot be confirmed from the photos. The front end shows extensive collision damage. The front fender at the wheel opening is severely crushed, with sharp creases, torn paint, and an irregular opening around the wheel arch. The front bumper cover is torn and displaced, with broken or missing sections exposing components behind it. Lower bumper trim and grille-area components are detached, and a large lower bumper section is hanging below the vehicle. Additional sections of the lower bumper cover are missing, leaving broken edges and large openings. Side-curtain airbags are visibly deployed, with green airbag fabric hanging from both visible rooflines in the front and rear passenger areas. This indicates that the restraint system will require comprehensive inspection and likely replacement of deployed components, along with diagnostic checks before the vehicle can be considered roadworthy. Dark linear scuffing is also visible on the rear quarter panel near and forward of the tail lamp. According to the VIN decode, this is a 2020 Mercedes-Benz GLS-Class SUV, specifically the GLS450-4M trim, equipped with a turbocharged 3.0-liter inline six-cylinder gasoline engine rated at 362 horsepower and a nine-speed automatic transmission. The decode identifies a seven-seat, three-row vehicle manufactured in Vance, Alabama. The drivetrain is not specified in the provided VIN data. The visible damage is severe and will require structural, suspension, lighting, sensor, cooling-system, electrical, and restraint-system inspection in addition to replacement of the damaged exterior components. The vehicle should not be operated until it has been professionally assessed and repaired.