2017 MERCEDES-BENZ GLS 450 4MATIC

The auction lists the primary damage as rear. Stage 1’s photo-based assessment states that the visible evidence supports this classification, with extensive collision damage concentrated at the rear, particularly the left rear corner, liftgate, rear window, tail lamp, and bumper. The left rear corner is severely crushed and torn. The liftgate has deep creases and significant deformation, while the rear window glass is missing, leaving exposed wiring and rough material around the opening. The left rear tail lamp is broken, with its lens, housing, and internal components exposed. The left and lower sections of the rear bumper are severely broken and displaced; wiring and detached components are hanging below the vehicle, and the separation exposes the muffler and other underbody components. A large detached bumper-cover section and additional broken trim pieces are also visible beside the vehicle. The lower portions of the visible front and rear doors have multiple pronounced dents, creases, and dark scuff marks. Damage around the left rear quarter, tailgate, bumper corner, and adjacent body panels is extensive, with torn edges and displaced exterior parts. The instrument cluster displays the message “Front Left Malfunction Service Required.” Restraint and tire-pressure warning indicators are also illuminated. These warnings require diagnostic testing and should not be assumed to be resolved by exterior repairs. According to the VIN decoding, this is a 2017 Mercedes-Benz GLS-Class GLS 450-4M SUV, built in the United States. It is equipped with a turbocharged 3.0-liter M276 gasoline V6 engine rated at 362 horsepower. The decoded safety information identifies front, side, and curtain airbag locations, as well as seat-belt pretensioners and load limiters. The visible damage indicates a substantial repair project involving the rear body structure or panels, liftgate, rear window, lighting, bumper components, wiring, and potentially restraint and electrical systems. A comprehensive physical inspection is required to determine the condition of concealed structural, mechanical, underbody, and safety-related components.