2018 MERCEDES-BENZ GLE 350 4MATIC

The auction lists the primary damage as front-end damage. Stage 1 reports that the visible evidence supports this claim: the front bumper cover and grille are missing, and the hood is visibly deformed. The front bumper cover is absent, exposing the bumper reinforcement, cooling components, washer reservoir, wiring, and mounting structures. The front grille and surrounding fascia are also missing, leaving the central cooling module exposed. Additional lower front fascia and air-guiding components are missing around the lower corners and beneath the bumper reinforcement. A separate white bumper cover assembly with grille components is shown removed from the vehicle. The hood has a raised crease and indentation at the center of its front edge, with an uneven gap above the exposed grille area. A short, thin scratch is visible on the white paint near the middle of the visible rear door. The provided findings do not establish the condition of concealed structural, cooling, electrical, restraint, or mechanical components; these areas require a physical inspection before repair or operation. The VIN decodes as a 2018 Mercedes-Benz GLE-Class SUV, trim listed as GLE350-4M, built in the United States. It is equipped with a 3.5-liter M276 gasoline V6 engine and a seven-speed automatic transmission. The decoded equipment includes standard ABS, electronic stability control, traction control, daytime running lights, rear visibility equipment, and front and side airbag systems. Some additional driver-assistance features are listed as optional. Four NHTSA recalls are reported for the applicable 2018 GLE-Class model range. They involve communication-module software or activation issues that may disable or impair the emergency-call (eCall) function, and a fuel-pump control-module issue associated with possible water accumulation in the spare-tire well that could result in engine stalling. Recall completion should be verified by VIN with Mercedes-Benz before purchase, and any outstanding campaigns should be completed by an authorized dealer.