2017 MERCEDES-BENZ GLE 350 4MATIC

The auction record lists the vehicle condition as “Clear” and identifies “Front End” as the primary damage. However, Stage 1’s photo-based assessment states that the visible evidence contradicts the “Clear” condition claim and supports the Front End classification, with substantial front-end collision damage present. The front bumper cover, grille, lower fascia, and related trim are missing. Detached bumper and grille components are lying near the vehicle; these parts show cracks, fractured attachment points, broken mesh sections, and separated trim. The front cooling stack is exposed, with visibly bent and crushed radiator and condenser fins and displaced components in front of the engine. The lower front support, reinforcement, and attached plastic components are also visibly deformed or displaced, with loose and hanging parts below the cooling assembly. A front-right headlamp assembly is missing, leaving its wiring and mounting areas exposed. The adjacent installed headlamp area has broken or incomplete mounting and trim components. The hood has moderate deformation along its leading edge, with an uneven, raised front edge above the exposed front assembly. Based on the VIN decode, this is a 2017 Mercedes-Benz GLE 350 SUV with a 3.5-liter naturally aspirated gasoline V6 engine, seven-speed automatic transmission, and left-hand drive. The vehicle was manufactured in the United States. The reported damage is concentrated at the front end, but the condition of concealed structural components, wiring, cooling-system integrity, engine accessories, and safety systems cannot be determined from these findings alone and should be verified through a detailed physical inspection before purchase.