2016 MERCEDES-BENZ GLC GLC300 Base-4M

The auction lists this vehicle as having a “JUNKED VEHICLE BILL OF SALE” and identifies the primary damage as “REAR END.” The visible evidence supports the rear-end damage classification: the rear liftgate, bumper assembly, and both rear corner areas show severe damage. The junked-vehicle bill-of-sale status cannot be confirmed from exterior photographs alone. The rear liftgate is deeply crushed and heavily deformed across the lower center section, including the license-plate mounting area. The rear bumper cover is missing across the center and both corner areas, exposing the bumper reinforcement and other internal components. Remaining bumper pieces are distorted, separated, and hanging below the vehicle. The rear body around the tail lamps, bumper corners, and quarter-panel edges has irregular gaps, displaced edges, and visible deformation, with internal components exposed. The extent of the damage suggests that the rear structure, mounting points, lighting, sensors, and related components should be carefully inspected before purchase; no conclusion about their operating condition can be made from these findings alone. Additional minor cosmetic scuffing is visible on the left front door, left rear door, and lower left front fender. The instrument cluster also shows an illuminated check-engine indicator and a red BRAKE warning indicator. These warnings require diagnostic testing and a brake-system inspection. According to the VIN decoding, this is a 2016 Mercedes-Benz GLC-Class SUV, trim designation GLC300 Base-4M, equipped with a 2.0-liter turbocharged four-cylinder gasoline engine (M274) rated at 241 hp. It was manufactured by Mercedes-Benz Cars in Bremen, Germany. The VIN decode does not provide the drivetrain or transmission details. The vehicle should be considered a major rear-end repair project, with mechanical, electrical, structural, and safety-system checks required before determining its roadworthiness or total repair cost.