2020 MERCEDES-BENZ GLC GLC300-4M

The 2020 Mercedes-Benz GLC-Class is listed by the auction with the condition designation “PERMIT NO BRAND - UNFIT” and a primary damage code of “FRONT END.” Stage 1 reports that the visible front-end collision damage supports the auction’s FRONT END classification; however, the photographs alone cannot confirm the permit, no-brand, or unfit condition claims. The most significant damage is concentrated at the front-left corner. The left headlamp assembly is missing, leaving an open cavity with internal components exposed. The front-left fender is severely creased and deformed around the wheel arch and forward edge. The wheel-arch trim is broken and displaced, with missing sections and exposed mounting points. The front-left edge of the hood is raised and irregular, creating an enlarged gap above the damaged corner. The front-left bumper cover is severely torn and broken, with missing sections and an open lower-side aperture. Additional front-end components and mounting areas are visible through the damaged headlamp and bumper openings. Both visible left-side doors also have multiple pronounced dents, creases, and uneven deformation along their middle and lower sections. Factory decoding identifies this vehicle as a 2020 Mercedes-Benz GLC-Class GLC300-4M Sport Utility Vehicle, manufactured by Mercedes-Benz Cars in Finland. It has a 2.0-liter, four-cylinder M264 gasoline engine, rated at 255 horsepower, paired with a nine-speed automatic transmission. The decoded drivetrain field is not specified. The vehicle should undergo a comprehensive structural, suspension, steering, lighting, restraint-system, and mechanical inspection before purchase. The exposed front-end components and extent of the collision damage require particular attention during evaluation.