2020 MERCEDES-BENZ GLC GLC300-4M

The auction record lists a salvage title and identifies the primary damage as “FRONT END.” Stage 1 reports that the visible front-end damage supports this stated damage code; however, the salvage-title status cannot be confirmed from exterior photographs. The front bumper cover, center grille, and passenger-side headlamp assembly are missing. The absence of these components exposes the front reinforcement, radiator area, wiring, mounting points, and other internal front-end components. Additional front fascia parts, including grille and bumper trim pieces, are shown detached on the ground behind the vehicle. The hood has moderate deformation at the front passenger-side corner, with a raised and irregular front edge and an uneven gap. The forward edge of the passenger-side front fender also has a broken-looking contour with exposed dark inner material. The extent of any damage to components behind the visible front structure, including the radiator, cooling system, wiring, sensors, and possible structural elements, requires physical inspection and testing. A small dark surface scuff is visible near the lower center of the rear bumper or liftgate area. According to the VIN decoding, this is a 2020 Mercedes-Benz GLC-Class GLC300-4M SUV, manufactured in Germany. It is equipped with a turbocharged 2.0-liter four-cylinder gasoline engine rated at 255 hp, a nine-speed automatic transmission, and 18-inch wheels. The decoded vehicle information lists standard ABS, electronic stability control, traction control, blind-spot monitoring, adaptive cruise control, pedestrian automatic emergency braking, and a rear visibility system. The actual presence and operating condition of these systems should be verified after repairs, as the front-end damage may have affected related wiring, sensors, or control modules.