2016 MERCEDES-BENZ E E350

The auction records list a salvage title and identify the primary damage as FRONT END. Stage 1’s photo-based assessment supports the unverified FRONT END damage claim: the front bumper and lower front fascia are extensively broken and partially detached. The salvage-title status cannot be confirmed from exterior photographs. The front bumper cover has multiple broken and torn sections across the lower center and left side, with internal components exposed. The lower grille and trim are missing, and a long lower section is detached and hanging near the ground. The right front bumper corner also has a large open gap, broken edges, scuffing, and a separated lower section. The rear bumper is extensively damaged on both sides. It has broad abrasion, gouging, cracks, broken and displaced sections, and irregular hanging edges. The lower right portion is separated from the body, with a loose cable or harness visible. The left rear bumper area also has substantial scraped and torn material and exposed attachment areas. The left rear quarter panel has broad deformation and creasing around the wheel arch and tail-lamp area, including a pronounced uneven depression above and forward of the rear wheel. According to the VIN decode, this is a 2016 Mercedes-Benz E-Class E350 sedan, manufactured in Germany. It is equipped with a 3.5-liter gasoline V6 engine. The available decode does not specify the drivetrain or transmission. The VIN data also indicates front and side airbags, seat-belt pretensioners and load limiters, and direct tire-pressure monitoring. The visible damage is concentrated at both ends of the vehicle, with particularly extensive damage to the front bumper and lower fascia. The condition of concealed components, mounting points, wiring, cooling systems, sensors, and other mechanical or safety-related systems is not established by these findings and should be verified through a thorough physical inspection before purchase.