2018 MERCEDES-BENZ E E300

The vehicle is listed with an MV-907A salvage certificate, and the auction’s primary-damage classification is FRONT END. Stage 1 reports that the visible evidence supports the FRONT END classification because of extensive front-end damage and missing components. However, the MV-907A salvage-certificate status cannot be confirmed from photographs. The front end has severe collision damage. The hood is substantially deformed, particularly along its leading edge, with raised and uneven sections and an irregular gap above the front-end components. The complete front bumper cover, grille, both headlamp assemblies, and associated lamp-area components are missing. The bumper assembly and related plastic pieces are detached and lying on the ground in broken and distorted sections. The near-side front fender and bumper junction has a broken-looking opening with missing outer trim and exposed internal components. The exposed upper radiator-support area also contains visibly uneven and distorted metal sections. The radiator area, bumper reinforcement, brackets, wiring, and other internal front-end components are exposed. The findings do not establish the condition of the engine, cooling system, suspension, steering, safety systems, or other mechanical and structural components; these require a thorough physical inspection and diagnostic assessment. VIN decoding identifies the vehicle as a 2018 Mercedes-Benz E-Class E300 sedan, manufactured in Germany. It is equipped with a 2.0-liter turbocharged four-cylinder gasoline engine rated at 241 hp and a nine-speed automatic transmission. The decoded vehicle information lists left-hand drive, five seats, standard ABS, electronic stability control, front collision warning, and other safety equipment. Some factory options and equipment details may vary by market and should be verified on the vehicle itself.