2017 MERCEDES-BENZ E E300-4M

The vehicle is a 2017 Mercedes-Benz E-Class sedan, identified by VIN WDDZF4KB0HA019767. The auction records a salvage certificate of title and lists REAR END as the primary damage. Stage 1 reports that the visible missing rear lamps, deformed trunk lid, damaged rear quarter panels, and deformed rear bumper support the stated rear-end damage claim. The salvage-title status itself cannot be confirmed from photographs. Both rear tail lamp assemblies are missing, leaving the lamp cavities and internal mounting areas exposed. The trunk lid has extensive creasing and deformation across the lower center and both outer sections. Its panel gaps are uneven, and the rear edge is raised relative to the surrounding body panels. The left and right rear quarter panels are visibly creased and deformed around the tail-lamp openings. The rear bumper cover is deformed and wrinkled across the center and both corners. Its lower edge is open, exposing internal mounting areas, and a loose component is visible at the lower right side. A section of the lower rear bumper trim or insert is also missing, with mounting points exposed. Inside the cabin, the driver’s seat outer bolster has a minor worn and peeling area in the light-colored upholstery. According to the NHTSA VIN decode, this is a Germany-built, left-hand-drive E-Class sedan with a 2.0-liter four-cylinder gasoline engine, automatic transmission, and the M274 engine designation. The decode identifies the trim as E300-4M, although no drivetrain value is provided in the decoded data. Factory-listed equipment includes standard ABS, electronic stability control, traction control, forward collision warning, direct tire-pressure monitoring, rear visibility assistance, and front and side air bags. A physical inspection is recommended to assess structural alignment, rear body and bumper reinforcement components, lighting wiring, sensors, and any concealed mechanical or safety-system damage.