2024 MERCEDES-BENZ CLE

The vehicle is listed with a Certificate of Destruction title and the auction’s primary damage classification is Front End. Stage 1 reports that the visible extensive front-end damage supports the Front End classification; however, the Certificate of Destruction title status cannot be confirmed or contradicted from the photographs alone. The front end has severe collision damage. The hood is raised and substantially deformed, particularly at the left-front corner, with a large uneven opening along its leading edge. The front bumper cover, grille, and lower fascia are missing, exposing the radiator area, internal brackets, panels, wiring, and other front-end components. Multiple support, trim, and plastic components are fractured, displaced, or absent, with loose wiring hanging below the front structure. The left-front fender is creased and deformed along its leading edge. A detached headlamp assembly and attached grille components are visible on the ground in front of the left-front corner. The driver steering-wheel airbag and side-curtain airbag are visibly deployed. Additional deployed airbag material is visible in the upper cabin area. The provided findings do not confirm the condition of the engine, cooling system, drivetrain, suspension, steering, electrical systems, or other components behind the visible damage. A complete structural, mechanical, electrical, and safety-system inspection will be required before repair or purchase decisions are made. According to the VIN decode, this is a 2024 Mercedes-Benz CLE coupe, specifically the CLE300 4MATIC/CLE 4-M Turbo specification. It is equipped with all-wheel drive, a turbocharged 2.0-liter four-cylinder gasoline engine rated at 255 horsepower, and was manufactured in Bremen, Germany.