2024 MERCEDES-BENZ CLE

The 2024 Mercedes-Benz CLE is listed with a Salvage Certificate of Title and an auction primary-damage classification of FRONT END. Stage 1 reports that the visible extensive front-end collision damage supports the FRONT END classification; the salvage certificate status cannot be confirmed from photographs. The hood has multiple severe creases, buckled areas, and an uneven raised front edge. The front bumper cover and lower fascia are extensively torn and displaced, with large sections missing or hanging away from the vehicle. The lower grille area is open, with detached or missing trim and a hanging piece on the left side as pictured. The adjacent front fender also has moderate deformation, including visible creasing and irregular panel contours. The driver’s steering-wheel airbag is deployed, and additional airbag fabric is visible below the dashboard near the driver’s knees. These findings indicate that the vehicle will require substantial body and front-end repairs, along with inspection and likely replacement of affected restraint-system components. The condition of the underlying structural, mechanical, cooling, electrical, and driver-assistance systems cannot be determined from the supplied findings. According to the VIN decode, this is a German-built 2024 Mercedes-Benz CLE coupe, identified as a CLE300 4MATIC/CLE300 4-M Turbo. It has all-wheel drive, a turbocharged 2.0-liter four-cylinder gasoline engine rated at 255 horsepower, and standard driver-assistance and safety equipment including front and side airbags, adaptive cruise control, blind-spot monitoring, lane-keeping assistance, and forward-collision warning. These systems should be professionally checked and calibrated after repairs.