2025 MERCEDES-BENZ CLE CLE300 4MATIC

The auction record lists this vehicle as having a salvage vehicle title, with front end damage as the primary damage classification. Stage 1 reports that the front-end classification is supported by the visible missing components, while noting that the salvage-title status cannot be confirmed from the photos alone. The 2025 Mercedes-Benz CLE has severe front-end damage. The front bumper cover, grille and surrounding fascia, and both headlamp assemblies are missing, leaving the cooling components, wiring, brackets, radiator and condenser area exposed. The left front fender is also absent, exposing the inner wheelhouse and associated mounting areas and wiring. A large lower front undertray is detached and lying on the ground with other removed front-end components. The lower side-sill trim beneath the right door is missing, leaving its mounting points and the underlying sill area visible. Based on the NHTSA VIN decode, this is a Mercedes-Benz CLE300 4MATIC coupe built in Germany. It is equipped with a 2.0-liter turbocharged four-cylinder gasoline engine, a nine-speed automatic transmission, and all-wheel drive. The decoded output lists a rated engine power of 255 hp and standard safety equipment including front, side and curtain airbags, forward-collision warning, lane-departure warning, lane-keeping assistance, blind-spot monitoring, rear cross-traffic alert, and rear automatic emergency braking. The extent of the missing front-end components indicates that replacement parts, structural and electrical inspection, and a complete assessment of the cooling and restraint-related systems will be required before the vehicle can be considered roadworthy.