2016 MERCEDES-BENZ CLA CLA250

The auction record lists the vehicle with a “CERTIFICATE OF TITLE” condition designation and “FRONT END” as the primary damage classification. Stage 1 reports that the visible front bumper, grille, and headlamp damage supports the FRONT END classification. The certificate-of-title status cannot be confirmed from exterior photographs. Visible damage includes severe cracking and separation of the front bumper cover, particularly at the visible left corner and lower center section. There are open gaps, a broken lower area, and a cable or wire hanging from the front fascia. The center grille is broken and displaced, with an irregular opening and damage to the lower grille surround. The visible front headlamp also has displaced or broken internal components and an irregular damaged area near its inner section. Scratches and paint chips are present on the hood and front bumper. At the rear, the quarter panel above and forward of the wheel has a broad dent with multiple pronounced creases extending from below the fuel-filler area toward the wheel opening. The adjacent rear bumper corner is deformed, with an uneven transition beneath the damaged quarter panel. The outer bolsters of both front seats have large torn and worn-through areas, exposing lighter underlying material. These are interior cosmetic repairs rather than structural findings. The VIN decodes this vehicle as a 2016 Mercedes-Benz CLA-Class CLA250 sedan, manufactured by Mercedes-Benz Cars in Hungary. It is listed with a 2.0-liter, four-cylinder gasoline engine and direct tire-pressure monitoring. The supplied decoding data does not specify the drivetrain or transmission. A physical inspection is recommended to assess concealed damage, mounting points, lighting and safety-system operation, wiring, alignment, and the condition of the title and repairs.