2017 MERCEDES-BENZ CLA CLA250

The auction records list the vehicle with a “Certificate of Title” condition and “Front End” as the primary damage classification. Stage 1’s photo review did not substantiate a significant front-end collision as the primary damage; the visible front-end issues were mainly hood paint peeling and minor bumper scuffing. The certificate-of-title status could not be confirmed from the photos. Visible damage is primarily cosmetic. A large irregular area of paint is missing from the right rear quarter panel ahead of the taillight, exposing a lighter underlayer with rust-colored discoloration. The hood has extensive peeling or missing dark finish across the front edge and center section, with lighter underlying material visible. Minor white scuffing and paint transfer are present on the left front bumper corner below the headlamp, and light scuff marks are visible across the center and right side of the rear bumper. Inside, the driver’s seat outer bolster and adjacent left-side upholstery show moderate wear, including extensive abrasion, surface peeling, and worn material. No mechanical or structural findings were provided, so the vehicle should be physically inspected for concealed damage, corrosion, proper operation, and the quality of any previous repairs. VIN decoding identifies this as a 2017 Mercedes-Benz CLA-Class CLA250 sedan with a 2.0-liter four-cylinder gasoline engine and a seven-speed automatic transmission. It is listed as left-hand drive and was manufactured by Mercedes-Benz Cars in Kecskemét, Hungary. Factory safety equipment listed by the decoder includes front airbags, side airbags for the first and second rows, ABS, electronic stability control, traction control, forward-collision warning, dynamic brake support, a rear-visibility system, and direct tire-pressure monitoring.