2014 MERCEDES-BENZ CLA CLA250

The auction record lists the vehicle as having a reconstructed salvage certificate and identifies the primary damage as “FRONT END.” The provided photo-based assessment supports the stated front-end damage claim: extensive collision damage is visible, including missing fascia components, a missing headlamp, deformed front panels, and exposed internal components. However, the reconstructed certificate status cannot be confirmed from exterior photographs alone. The front bumper cover, grille, and central and lower fascia components are missing, exposing the radiator/condenser area, wiring, mounting brackets, and other internal parts. The metal bumper reinforcement is exposed and shows surface scuffing and localized deformation. Multiple plastic supports and mounting components around both front corners and the lower front assembly are broken, detached, or absent. Removed grille, bumper, and fascia pieces are also shown separately on the ground. The left front fender is severely creased and deformed around the wheel arch and front edge. The leading edge of the hood is raised and uneven. The left front headlamp assembly is missing, leaving its mounting area and internal components exposed. The driver airbag has deployed from the steering wheel, and additional white airbag fabric is hanging from the lower dashboard areas on both the passenger-side and driver-side areas. The front driver’s seat outer bolster has abrasion, including a worn-through section with darker material exposed. VIN decoding identifies this vehicle as a 2014 Mercedes-Benz CLA-Class CLA250 sedan, manufactured by Mercedes-Benz Cars in Hungary. The decoded specifications indicate a 2.0-litre, four-cylinder gasoline engine; drivetrain and transmission details were not provided. A full inspection should address the structural and mechanical condition of the front end, cooling and wiring systems, airbag and restraint systems, mounting points, and all components required for safe reconstruction.