2018 MERCEDES-BENZ CLA CLA250

The vehicle is listed with a “CERT OF TITLE SLVG REBUILDABLE” designation, and the auction’s primary damage classification is “FRONT END.” These are unverified auction records. Stage 1 reports that the available photos show localized damage to the front lower bumper lip or trim, but no major front-end crushing or structural deformation. Its assessment is that the visible evidence only partially supports the “FRONT END” classification and does not substantiate the full salvage-rebuildable condition. The most significant visible damage is at the lower front bumper. The bumper lip or splitter is separated along the lower edge, with a protruding section, scuffing, a visible gap, and an irregular separated edge across the lower front section. Repair or replacement of the affected lower bumper trim may be required. No other front-end or structural damage is identified in the provided findings. Minor cosmetic damage includes light-colored scuffing or paint transfer on both lower side skirts near the front doors, as well as several light vertical and horizontal scuff marks on the rear bumper cover. VIN decoding identifies this vehicle as a 2018 Mercedes-Benz CLA-Class CLA250 sedan, built in Hungary. It is equipped with a 2.0-liter, four-cylinder gasoline M270 engine, a turbocharger, and a seven-speed automated manual transmission. The decoded vehicle has left-hand drive, five seats, 17-inch wheels, and standard systems including ABS, electronic stability control, traction control, direct TPMS, rear visibility assistance, and front and side air bags. The VIN decoder notes that some information may vary for non-U.S.-market vehicles. A physical inspection is recommended to verify the condition of the bumper mounting points, lower front components, underbody, cooling system, suspension, steering, safety systems, and any repairs associated with the salvage-rebuildable title.