2016 MERCEDES-BENZ CLA CLA250-4M

The auction record lists the vehicle as having a salvage title, with “FRONT END” recorded as the primary damage. The provided photo-based assessment finds that the visible evidence supports the stated front-end damage claim through extensive missing and exposed components. However, the salvage-title status cannot be independently confirmed from the photos. The front bumper cover, grille, front fascia, and lower front trim are missing, exposing the front reinforcement, radiator and other cooling components, wiring, and internal front-end structure. The front-left headlamp is displaced, with open gaps and exposed mounting areas. Both front wheel-arch liners and adjacent lower plastic panels are missing. The front-right fender is also absent, exposing the inner fender structure and wheel-well components. The leading edge of the hood has an irregular, uneven gap above the exposed front-end components. A detached front-end trim or reinforcement piece, part of a wheel-well liner, and loose wiring are lying beside the vehicle. Additional damage includes extensive branching cracks across most of the rear windshield. Light scuffing is present on the right rear bumper and lower rear-quarter area, as well as along the lower left doors and rocker panel. The outer bolster of the front driver’s seat has substantial torn or missing upholstery, exposing the light-colored underlying material. According to the VIN decode, this is a 2016 Mercedes-Benz CLA-Class sedan, listed in CLA250-4M trim. It is equipped with a gasoline 2.0-liter inline four-cylinder engine and was manufactured by Mercedes-Benz Cars in Kecskemét, Hungary. The VIN is WDDSJ4GB9GN351769. The decode identifies front driver and passenger airbags, side airbags for the first and second rows, curtain airbags, seat-belt pretensioners and load limiters, and direct tire-pressure monitoring. The drive type and transmission details were not provided.