2018 MERCEDES-BENZ CLA CLA250-4M

The 2018 Mercedes-Benz CLA-Class is listed in the auction record with a salvage certificate of title and “FRONT END” as the primary damage classification. The auction’s front-end classification is consistent with the visible severe damage at one front corner. However, the salvage-title status cannot be confirmed from photographs alone. The damaged front fender is severely crushed and sharply creased around the wheel opening and headlamp area. The corresponding headlamp assembly is missing, leaving wiring, mounting points, and other internal components exposed. The bumper cover is torn and partially missing at the damaged corner, with broken and detached plastic sections hanging below the vehicle. The wheel-arch liner and adjacent trim are also severely torn, displaced, and hanging around the front tire. The damaged-side front tire has extensive tearing and abrasion across the tread and sidewall. The hood corner adjacent to the damaged fender is moderately deformed, with an uneven panel gap. These findings indicate substantial front-corner impact damage; the condition of components not visible in the provided findings, including structural, suspension, steering, braking, and mechanical systems, has not been established. Additional visible issues include minor scuffing and finish loss along the lower rocker panel on the photographed side. Inside the vehicle, the front seat outer bolster has a moderate tear, exposing lighter underlying material. According to the VIN decode, this is a left-hand-drive 2018 Mercedes-Benz CLA-Class sedan, identified as the CLA250-4M trim. It is equipped with a 2.0-liter four-cylinder gasoline engine and a seven-speed automated manual transmission. The vehicle was manufactured by Mercedes-Benz Cars in Kecskemét, Hungary. The decode identifies 17-inch wheels, direct tire-pressure monitoring, electronic stability control, traction control, front and side airbags, and curtain airbags as standard equipment; some other equipment is listed as optional or unspecified. A comprehensive physical inspection is recommended before purchase, with particular attention to the front structure, suspension and steering components, wheel alignment, wiring, safety systems, cooling and engine-bay components, and the operation of all repaired or replaced equipment.