2021 MERCEDES-BENZ CLA AMG CLA 35

The auction lists the primary damage as “Right Front.” Stage 1 reports that the visible evidence supports right-front damage, including the missing right-front headlamp and extensive damage or missing components at that corner; additional damage is also visible across the front end. The front bumper cover and grille fascia are missing, exposing the front reinforcement, cooling components, wiring, and internal mounting areas. The right-front headlamp assembly is absent, while the left-front headlamp is displaced from its body opening. The hood has multiple creases and raised or depressed areas, with an uneven front-edge gap. The front reinforcement beam is exposed and shows scuffing and surface abrasions. Lower front fascia and underbody splash-shield sections are missing, leaving cooling-area components, brackets, wiring, and wheel-well-side components exposed. Electrical wiring and connectors are visibly hanging in the open lower bumper area. Removed bumper, headlamp, grille-related components, brackets, and underbody panels are shown separately. Inside the passenger compartment, a side/curtain airbag is visibly deployed behind the front seat, and a rear curtain airbag is deployed along the rear side-window area. Replacement of deployed restraint-system components and a complete inspection of related safety systems will be required. At the rear, the lower diffuser/bumper trim is detached and hanging below the rear bumper, with part of the diffuser extending onto the ground behind the vehicle. Several light vertical scuff marks are visible on the left rear quarter panel near the wheel arch. According to the VIN decode, this is a 2021 Mercedes-Benz CLA-Class coupe, AMG CLA35 4MATIC trim, with a 2.0-liter turbocharged four-cylinder gasoline engine, a nine-speed automatic transmission, and 18-inch wheels. It was manufactured in Kecskemét, Hungary. The decoded equipment and safety information includes front and first- and second-row side/curtain airbag coverage, seat-belt pretensioners and load limiters, ABS, electronic stability control, traction control, blind-spot monitoring, and a standard rear-visibility system. The drivetrain information is identified by the trim as 4MATIC, although the NHTSA drivetrain field is blank. The vehicle has substantial front-end collision damage, missing exterior and underbody components, and deployed airbags. A detailed physical inspection is necessary to assess the condition of the underlying structure, cooling system, wiring, lighting, restraint systems, and mechanical components before repair or purchase.