2018 MERCEDES-BENZ CLA 250 CLA250

The auction lists the primary damage as **Front End**. Stage 1 reports that the visible evidence supports this claim, noting extensive missing front fascia components and visible hood deformation. The front end shows severe collision damage. The hood is creased and deformed across the front and center, with a raised, uneven gap above the radiator opening. The front bumper cover, central grille, and lower fascia are missing, exposing the bumper reinforcement, radiator and condenser areas, lower intercooler area, wiring, internal supports, and other front-end components. Multiple plastic covers, side guides, air-deflection panels, and surrounding trim are also absent, with disconnected wiring visible near the front corners. The front-right headlamp assembly is missing, while the front-left headlamp area has substantial open gaps and exposed mounting points, indicating moderate mounting-area damage. A front fender on the photographed side is missing, exposing the inner fender, wiring, fastener locations, and wheel-side structure. The lower portions of both doors on that side have visible dents, horizontal creasing, and paint scuffing. The VIN decodes this vehicle as a 2018 Mercedes-Benz CLA-Class CLA250 sedan with a turbocharged 2.0-liter, four-cylinder gasoline engine, a seven-speed automated manual transmission, and left-hand drive. The vehicle was manufactured by Mercedes-Benz Cars in Kecskemét, Hungary. The decoded information identifies 17-inch wheels and standard equipment including ABS, electronic stability control, traction control, daytime running lights, and a rear visibility system. Official NHTSA recall records list several campaigns applicable to this make, model, and year. These include recalls concerning the emergency-call communication module software, possible deactivation or failure of the eCall function, the driver air-bag grounding system, and bonding of the front roof panel on vehicles equipped with a panoramic sunroof. The roof-panel campaign was later expanded in a subsequent recall. Recall completion status for this vehicle should be confirmed with Mercedes-Benz using the VIN. The visible damage is concentrated at the front of the vehicle and includes substantial missing parts and exposed components. A complete physical inspection is recommended to assess the radiator support, cooling system, wiring, lighting system, structural components, restraints, suspension, and mechanical systems before purchase or repair.