2017 MERCEDES-BENZ CLA 250 CLA250

The auction lists the primary damage as “Left Side.” However, Stage 1 reports that the visible damage is concentrated on the passenger/right side, while the opposite side appears substantially intact; this contradicts the stated left-side primary-damage claim. The documented damage on the visible side includes a pronounced inward crease and dent in the front fender above and behind the wheel opening, extending toward the headlamp area. The front door has moderate horizontal deformation around the door-handle and beltline area, along with light-colored paint scuffs and scratches below it. The rear door shows a horizontal band of scuffing and apparent shallow surface deformation extending rearward from the front-door area. Several additional thin, light-colored scratches are visible on the lower front door. The reported damage is limited to exterior body panels in the supplied findings; the condition of the structure, suspension, wheels, lights, mechanical systems, and interior is not established and should be physically inspected. The VIN decodes as a 2017 Mercedes-Benz CLA-Class sedan, trim CLA250, with a 2.0-liter four-cylinder gasoline engine and a seven-speed automatic transmission. The vehicle was manufactured by Mercedes-Benz Cars in Hungary. The VIN data identifies front airbags, side airbags for the first and second rows, ABS, electronic stability control, traction control, forward-collision warning, and a standard rear-visibility system; drive type is not specified in the decode.