2017 MERCEDES-BENZ CLA 250 CLA250

The auction lists the primary damage as **Front End**. Stage 1 reports that the visible evidence supports this classification, with severe damage to the front bumper, grille, headlamp area, hood edge, and adjacent front fender. The front bumper cover is torn, cracked, and displaced, with large openings and detached sections exposing internal components. The headlamp assembly is missing from the vehicle’s right front corner, leaving the mounting area and other components exposed. The adjacent right front fender is deformed and separated from the surrounding trim. The hood has a raised, uneven front edge with a pronounced crease and an irregular gap above the front fascia. The grille sections are displaced and partially detached, with broken or missing areas. The front radiator and bumper-support area are exposed, with loose wiring visible. Additional damage is present at the rear. The rear bumper cover is separated along its upper edge, particularly below the right taillamp, and has cracks, scuffing, and an uneven lower edge. The lower rear diffuser trim is also detached and displaced. Inside, the tan upholstery on a front seat cushion has a torn and missing section near the inner side. The VIN decodes this vehicle as a 2017 Mercedes-Benz CLA-Class CLA250 sedan, manufactured by Mercedes-Benz Cars in Hungary. It is equipped with a 2.0-liter four-cylinder gasoline engine and a seven-speed automatic transmission. The decoder lists front, side, and curtain airbags, ABS, electronic stability control, traction control, forward collision warning, and a rear visibility system as standard equipment. The damage report does not confirm the operating condition of the engine, transmission, cooling system, electrical systems, airbags, steering, suspension, or other components. A comprehensive physical inspection and verification of these systems are recommended before purchase.