2016 MERCEDES-BENZ CLA 250 CLA250

The auction record lists the vehicle as Salvage, with “Left Rear” as the primary damage classification. Stage 1 reports that the visible damage is concentrated at the left rear and supports the stated Left Rear classification; however, the broad Salvage title status could not be independently confirmed from exterior photographs. The main damage is at the rear of the vehicle. The trunk lid has severe deformation across the left-center area, including pronounced creasing, crushed sections, an irregular lower edge, and uneven gaps around the trunk opening. The surrounding rear body panel, including the areas around the trunk opening and left taillight, also shows moderate creasing and irregular contours. The left rear taillight lens is moderately damaged, with fractures and damaged or missing sections along its lower and inner portions. The left rear bumper corner is severely torn and split, with an open section, distorted edges, and extensive scraping. The rear bumper cover also has moderate deformation, deep scuffing, and multiple abrasions across the left and center sections. According to the VIN decode, this is a 2016 Mercedes-Benz CLA-Class CLA 250 sedan manufactured by Mercedes-Benz Cars in Hungary. It is equipped with a 2.0-liter, four-cylinder gasoline engine. The available data also identifies front airbags, side airbags for the first and second rows, seat-belt pretensioners and load limiters, and direct tire-pressure monitoring. Drive type and transmission details were not provided. A thorough inspection should verify the condition of the rear body structure, trunk alignment and latch, lighting and wiring, bumper mounting points, and related safety systems before purchase or repair.