2017 MERCEDES-BENZ CLA 250 CLA250

The vehicle is a 2017 Mercedes-Benz CLA 250 sedan with a 2.0-litre, four-cylinder gasoline engine and seven-speed automatic transmission. VIN decoding identifies it as a left-hand-drive vehicle manufactured by Mercedes-Benz Cars in Kecskemét, Hungary. The decoded equipment includes ABS, electronic stability control, traction control, forward-collision warning, automatic emergency braking, a rear-visibility system, direct tire-pressure monitoring, and standard front and side airbags. The only documented exterior defect is a minor cosmetic scratch on the outer surface of the right rear taillight lens. It appears as a thin, light-colored linear mark. The instrument-cluster photos show an illuminated check-engine warning. The underlying cause cannot be determined from the available information and should be diagnosed before purchase. A tire-pressure warning is also illuminated; the photos do not establish whether this relates to tire condition, pressure, or a sensor issue. These items should be checked during a physical inspection and diagnostic scan. The auction record lists the title condition as “Clear” and the primary damage as “Front End.” Stage 1 reports that the photos do not show obvious front-end collision damage and that the “Front End” classification is not supported by the visible evidence. Stage 1 also states that the “Clear” title condition cannot be confirmed or contradicted from the photos.