2017 MERCEDES-BENZ CLA 250 4MATIC

The 2017 Mercedes-Benz CLA 250 is listed by the auction with a salvage condition and “Front End” as the primary damage classification. The auction condition is an unverified designation; the visible evidence supports the stated front-end damage area, with extensive missing and deformed front fascia components. The available photos do not independently establish salvage title status. Observed front-end damage includes a substantially deformed hood with a raised, uneven front edge and a pronounced concave area. The front bumper cover, grille, grille trim, and one headlamp assembly are missing. The exposed area includes the reinforcement beam, radiator/condenser and lower cooling components, wiring, and related mounting structures. Multiple plastic fascia supports, lower trim pieces, air guides, and other bumper components are broken, detached, separated, or absent. The visible front fender has severe deformation and torn or displaced material around the wheel opening and front corner. The exterior mirror assembly is also missing from the visible front door, leaving its mounting base and internal attachment components exposed. Additional cosmetic damage consists of light scratches and scuffs on the visible side doors and rear quarter-panel area, along with light scuffing on the lower-right section of the rear bumper. The instrument display shows the warning: “Check Left Daytime Running Light.” According to the NHTSA VIN decode, this is a 2017 Mercedes-Benz CLA-Class sedan manufactured by Mercedes-Benz Cars in Hungary. It is identified as a gasoline-powered vehicle with a 2.0-liter, four-cylinder engine, a seven-speed automatic transmission, and the CLA 250-4M trim designation. The decoded data identifies left-hand drive, five seating positions, standard ABS, electronic stability control, traction control, forward collision warning, and a direct tire-pressure monitoring system. Drivetrain details are not specified in the provided decode. The vehicle will require extensive front-end reconstruction, including replacement of the missing exterior components and headlamp, repair or replacement of damaged body and mounting structures, and inspection of the exposed cooling system, wiring, lighting system, and surrounding components. A comprehensive physical inspection is recommended before purchase to identify concealed structural, mechanical, electrical, and safety-system damage.