2018 MERCEDES-BENZ CLA 250 4MATIC

The auction lists the primary damage as “Front End.” However, Stage 1 reports that the visible evidence does not support a significant front-end damage claim: the front end appears substantially intact, with only minor cosmetic scuffing and paint chips visible. The documented damage is limited to cosmetic areas. Several light linear scuff marks and grayish surface transfer are visible on the lower left and left side of the front bumper. Several small paint chips or light-colored spots are also visible on the front left fender and adjacent hood edge. No other damage findings were provided. The VIN decoder identifies this vehicle as a 2018 Mercedes-Benz CLA-Class sedan, with the CLA250-4M trim designation. It has a 2.0-liter, four-cylinder gasoline engine and a seven-speed automated manual transmission. The vehicle was manufactured by Mercedes-Benz Cars in Kecskemét, Hungary. The decoder does not specify the drive type separately. NHTSA recall records include several campaigns associated with the 2018 CLA250 or applicable CLA-Class vehicles. These include recalls involving emergency-call communication-module software or activation, a potential driver-airbag deployment issue related to steering-component grounding, and a roof-panel bonding issue on vehicles equipped with a panoramic sunroof. The roof-panel recall was later expanded in campaign 23V854000. Recall completion should be verified by VIN with Mercedes-Benz or an authorized dealer before purchase.