2024 MERCEDES-BENZ CLA 250 COUPE 4MATIC

The vehicle is listed with a Salvage condition and a Front End primary-damage classification. Stage 1 reports that the visible evidence supports the unverified Front End damage claim because the front bumper cover, grille, headlamps, and other front-end components are visibly missing. The photographs cannot independently confirm the Salvage title status. The front bumper cover is absent, exposing the bumper reinforcement, cooling assemblies, radiator area, washer reservoir, wiring, and lower front structure. The front grille and both headlamp assemblies are missing, leaving open mounting areas and internal components visible. One front fender is also absent, exposing the wheel-well area, brake assembly, suspension, and related components. At the visible front corner, no wheel or tire is installed; the brake rotor, caliper, suspension, and axle components are exposed. The condition of concealed structural, mechanical, electrical, and safety-system components cannot be determined from these findings. The fuel-filler door is missing at the rear quarter panel. The filler cap and recess are exposed, with chipped or abraded paint visible around the opening. VIN decoding identifies this as a 2024 Mercedes-Benz CLA-Class, CLA 250 4MATIC, with all-wheel drive, a 2.0-liter turbocharged four-cylinder gasoline engine, and an eight-speed automatic transmission. The vehicle is listed as a four-door sedan/saloon and was manufactured by Mercedes-Benz Cars in Hungary. Further inspection and repair-estimate assessment are required before purchase, including checks of the front structure, cooling system, wiring, suspension, axle components, braking system, restraint systems, and vehicle electronics.