2022 MERCEDES-BENZ CLA 250 COUPE 4MATIC

The vehicle is listed by the auction with a Salvage title status and “Rear” as the primary damage classification. Based on the provided assessment, the visible extensive rear-end damage supports the unverified “Rear” damage code; however, the Salvage title status cannot be independently confirmed from photographs alone. The rear of the vehicle has severe collision damage. The trunk lid is heavily deformed, with pronounced creasing and enlarged, uneven gaps along the lower and left-side edges. The left rear quarter panel and wheel-arch area are extensively crushed and creased, with displaced areas around the rear lamp and bumper. The left rear tail lamp is cracked and broken, with separated lens pieces and exposed internal components. The rear bumper cover is torn, crushed, and displaced, particularly on the left and center sections. Its lower components are separated and hanging away from the vehicle, with broken plastic and exposed areas beneath the trunk opening. The left rear corner shows broader deformation affecting the quarter panel, tail-lamp surround, trunk edge, and bumper. These findings indicate that repairs may involve multiple exterior body panels, lighting components, bumper structures, and associated mounting areas. The provided findings do not establish the condition of underlying structural, suspension, electrical, or mechanical components. Additional moderate damage is visible at the front left corner. The front left fender is creased and displaced near the headlamp and wheel arch, with an irregular panel gap. The front left bumper corner has scraping, scuffing, and irregular separation where it meets the fender and headlamp. The instrument display visibly shows a “4matic Inoperative” message. This is a concern requiring diagnostic inspection, but the underlying cause is not established by the available findings. A red airbag-related warning symbol is also illuminated. This does not confirm airbag deployment, and the cause of the warning should be diagnosed before purchase or operation. VIN decoding identifies the vehicle as a 2022 Mercedes-Benz CLA-Class/CLA 250-4M Coupe, manufactured by Mercedes-Benz Cars in Hungary. It is equipped with a 2.0-liter turbocharged four-cylinder gasoline engine, a seven-speed automatic transmission, and front- and passenger-seat airbags with side airbags for the first and second rows. The decoder identifies the drivetrain trim as CLA250-4M, while the available data does not provide a separate drive-type field.