2020 MERCEDES-BENZ C C300

The vehicle is a 2020 Mercedes-Benz C-Class C300 sedan listed with a Salvage Certificate. The auction identifies the primary damage as “FRONT END.” However, the photo-based assessment does not support this as the main visible damage: the front end appears largely intact apart from a visible hood gap, while substantial damage is present at the left rear corner. The salvage-certificate status cannot be verified from the photos. Visible damage includes a raised and uneven leading hood edge, with enlarged gaps along the front fender and headlamp areas. At the rear, the bumper cover is missing, exposing the lower bumper structure, parking sensors, exhaust outlets, and internal components. The left rear tail-lamp assembly is also missing, leaving its mounting cavity open. The left rear quarter panel and rear bumper corner show pronounced dents, creases, and irregular deformation around the wheel arch, with internal components exposed at the rear corner. A rear-door interior trim panel appears to be missing, exposing the inner door structure and components. According to the VIN decoding, this is a left-hand-drive 2020 Mercedes-Benz C300 sedan manufactured in East London, South Africa. It is equipped with a 2.0-liter turbocharged four-cylinder gasoline engine, a seven-speed automatic transmission, and 18-inch wheels. Recall status was not checked and is therefore unknown. The extent of structural, suspension, sensor, lighting, and mechanical damage cannot be determined from the supplied findings alone and should be verified through a thorough physical inspection before purchase.