2016 MERCEDES-BENZ C C300

The auction record lists the vehicle as having a “CERT OF TITLE SLVG REBUILDABLE” status with “FRONT END” as the primary damage classification. Stage 1 reports that the visible front-end damage supports the auction’s FRONT END classification; however, the salvage/rebuildable title status cannot be confirmed from the photos. The main damage is concentrated at the front of the vehicle. The left side and front edge of the hood are severely depressed and creased, with abrasions, an irregular front edge, and uneven gaps relative to the fender and headlamp. The front bumper cover and lower lip have extensive scraping, deformation, and irregular openings. The lower grille and surrounding fascia are distorted, while the front grille has damaged or missing sections and the center emblem is absent. Additional damage is visible across the front fascia with the hood raised. The windshield has extensive spiderweb cracking and a large open damaged section in the upper driver-side area. The exterior trim at the driver-side A-pillar/windshield edge is detached and hanging beside the front door. The windshield and associated trim require attention before the vehicle can be considered roadworthy. Additional cosmetic findings include a short vertical scuff on the lower center of the rear bumper and worn, torn upholstery with the underlayer exposed on the outer lower bolster of the front driver’s seat. VIN decoding identifies this vehicle as a 2016 Mercedes-Benz C-Class C300 sedan with a 2.0-liter, four-cylinder gasoline engine. The vehicle was manufactured by Mercedes-Benz Cars in Vance, Alabama. The available decoding data does not specify the drivetrain or transmission. A full inspection should include the front structure, hood and latch alignment, cooling and lighting systems, windshield installation area, safety systems, suspension, and any concealed mechanical or electrical damage.