2017 MERCEDES-BENZ C C300-4M

The vehicle is listed with a public salvage title, and the auction identifies the primary damage as front-end damage. Stage 1’s photo assessment supports this claim, noting severe deformation and breakage at the hood, front bumper cover, grille surround, and front corner panel areas. The hood is severely crumpled, with deep creases, a bent and raised front edge, and downward deformation across the center-front section. Large, uneven gaps are visible above the grille and headlamp areas. The front bumper cover is severely cracked, torn, displaced, and separated from adjacent panels, particularly around the visible right front corner and headlamp. Dark openings are exposed behind the displaced bumper sections. The front fender edge has an irregular contour and enlarged gap at the hood and headlamp junction. The grille surround also shows broken, uneven edges and separation at the lower-right grille-to-bumper connection. The VIN decodes as a 2017 Mercedes-Benz C-Class C300-4M coupe, manufactured in Germany. It is equipped with a 2.0-liter turbocharged gasoline four-cylinder M274 engine, automatic transmission, and left-hand drive. The decoded vehicle information lists standard ABS, electronic stability control, traction control, forward collision warning, blind-spot monitoring, and a rear-visibility system; some other driver-assistance features are listed as optional. The provided findings document substantial exterior front-end collision damage. They do not establish the condition of components behind the damaged panels, the vehicle’s mechanical systems, structural areas, restraint systems, or driver-assistance sensors. A comprehensive physical inspection and system diagnostic check would be required before purchase.