2017 MERCEDES-BENZ C C300-4M

The auction record lists the vehicle condition as “CERTIFICATE OF TITLE” and identifies the primary damage as “FRONT END.” Stage 1 reports that the visible evidence supports the FRONT END classification because the front bumper cover is missing and front-end components are exposed. Stage 1 also notes that the photographs do not independently verify the CERTIFICATE OF TITLE condition. The front bumper cover is absent from the vehicle, leaving the lower front area and underlying components exposed. Loose or hanging components, wiring, and mounting pieces are visible in this area. The detached blue bumper cover has multiple cracks, abrasions, damaged edges, and scraped paint around the lower openings. Additional exterior damage includes light-colored paint scuffing and localized surface chipping on the left rear bumper corner. Inside the cabin, the driver’s seat outer lower bolster shows abrasion and a small tear with lighter material exposed. The center armrest has wrinkling, abrasion, and localized leather surface wear. According to the VIN decode, this is a 2017 Mercedes-Benz C-Class coupe, identified as a C300-4M, built in Germany. It is equipped with a 2.0-liter, four-cylinder gasoline engine rated at 241 horsepower and an automatic transmission. The decoded safety equipment includes front, side, and curtain airbags, ABS, electronic stability control, traction control, forward collision warning, blind-spot monitoring, and a standard rear visibility system. The VIN decoded cleanly with a valid check digit. A physical inspection should assess the exposed front-end structure, wiring, mounting points, and other components behind the missing bumper before repair or road use.