2021 MERCEDES-BENZ C C300-4M

The auction record lists the vehicle as having a Salvage Certificate, with REAR END recorded as the primary damage. The visible evidence supports the unverified rear-end damage classification, showing severe damage across the rear bumper, trunk area, tail panel, rear quarter panels, lamp mounting area, and associated components. Salvage certificate status cannot be confirmed from the photographs. The rear bumper cover is missing, exposing the underlying bumper components and body structure. The right rear tail lamp is detached from its mounting position, with wiring visible. The right rear quarter and adjacent tail panel have pronounced creasing, crushed edges, open gaps, and displaced sections around the lamp and trunk opening. The left rear quarter panel also has a large dent with multiple sharp creases extending around the rear lamp and wheel-arch area. The left rear tail panel and bumper mounting area are deformed, with exposed brackets and missing exterior sections. The trunk lid is buckled and creased, with a large irregular gap at the right rear edge and displaced surrounding trim. The rear bumper reinforcement and lower components are exposed, displaced, and hanging below the vehicle. A silver-colored lower rear component and adjacent black plastic parts are detached or hanging beneath the right side. Electrical wiring and connectors are exposed in the damaged right rear lamp and trunk area. According to the VIN decode, this is a 2021 Mercedes-Benz C-Class convertible/cabriolet, identified as a C300-4M, with a 2.0-liter four-cylinder gasoline engine, seven-speed automatic transmission, and left-hand drive. The vehicle was manufactured in Bremen, Germany. The extent of the visible rear structural and body-panel damage means that repairs should include a thorough inspection of the rear body structure, bumper mounting points, lighting system, wiring, trunk alignment, and any components behind the damaged panels.