2016 MERCEDES-BENZ C C300-4M

The auction record lists the vehicle’s condition as “Certificate of Title” and identifies the primary damage as “Front End.” Stage 1 reports that the visible evidence supports the FRONT END damage code; the certificate-of-title status cannot be confirmed from the vehicle photos. The 2016 Mercedes-Benz C-Class sedan has severe visible damage across the front end. The front bumper cover, center grille, and lower fascia components are missing or detached, leaving the radiator, condenser area, wiring, support components, and lower front structure exposed. Loose bumper components are visible on the ground in front of the vehicle. The metal front bumper reinforcement is visibly deformed and scraped. The hood is severely creased and crushed along its front edge and around the center emblem area. The front-left headlamp is displaced, with broken or missing surrounding mounting and trim pieces. The front-left fender and wheel-arch edge are deformed near the bumper junction, and the trim and mounting areas around both front lamps are damaged or absent. Inside the vehicle, the steering-wheel airbag and lower driver-side dashboard/knee airbag are visibly deployed. The condition of the remaining airbag system, seat-belt pretensioners, sensors, wiring, and other safety components cannot be determined from the provided findings. Minor vertical white scuffs or scratches are visible on the left rear door and adjacent rocker panel. According to the VIN decode, this is a 2016 Mercedes-Benz C-Class, C300-4M trim, four-door sedan, with a 2.0-liter inline four-cylinder gasoline engine. It was manufactured by Mercedes-Benz Cars in Vance, Alabama, USA. The drivetrain and transmission details were not provided by the decoder. A full physical inspection is recommended, including the front structure, cooling system, suspension, steering, lighting, electrical systems, and complete occupant-restraint system, before repair or purchase.