2024 MERCEDES-BENZ C AMG C63 S E Performance

The auction record lists the vehicle as having a salvage certificate of title, with “FRONT END” recorded as the primary damage. Stage 1 reports that the visible extensive front-end damage supports the stated FRONT END damage code; however, salvage-title status cannot be confirmed from photographs. The 2024 Mercedes-Benz C-Class has severe damage concentrated at the front. The hood has multiple deep creases and substantial deformation, with the leading edge raised and irregular. The front bumper cover is torn and broken across the center and right corner, with detached sections and missing material exposing components behind it. The grille is broken and displaced around the emblem area, and the right headlamp assembly is separated from the surrounding body and bumper components. The leading edge of the front fender is also severely creased and deformed around the wheel opening. The lower front bumper and air-intake trim are detached and hanging away from the vehicle. Extensive exterior parts are missing or displaced around the front corner and grille, leaving radiator-area components, wiring, mounting pieces, and other internal parts exposed. The condition of the underlying cooling, structural, lighting, wiring, and driver-assistance systems requires thorough physical inspection and testing. Additional damage is present at the rear: sections of the lower rear bumper/diffuser trim are missing, with open gaps, exposed mounting points, and exhaust-related components visible. According to the VIN decode, this is a 2024 Mercedes-Benz C-Class AMG C63 S E Performance sedan, built in South Africa. It is equipped with a 2.0-liter turbocharged four-cylinder gasoline engine, a nine-speed automatic transmission, and listed output of 469 horsepower. The vehicle has front and side curtain airbags, seat-belt pretensioners and load limiters, ABS, electronic stability control, traction control, forward-collision warning, blind-spot monitoring, parking assistance, and a standard rear-visibility system. These systems should be checked for damage, faults, calibration requirements, and proper operation after repairs.