2015 MERCEDES-BENZ C 4-MATIC

The auction lists this vehicle as **MV907A – Parts Only**, with **FRONT END** as the primary damage classification. Stage 1 reports that the visible evidence supports the front-end damage classification through extensive damage and missing components. However, Stage 1 also states that the MV907A Parts Only condition cannot be confirmed from photographs alone. The vehicle is a 2015 Mercedes-Benz C-Class sedan, 4MATIC all-wheel drive, equipped with a 2.0-liter four-cylinder gasoline engine. The VIN decode identifies it as manufactured by Mercedes-Benz Cars in the United States. The front end has extensive severe collision damage. The hood is heavily creased and deformed along the front edge and left-front section, with separated and irregular panel edges. The front bumper cover, grille, and central front fascia are missing, exposing the bumper reinforcement, cooling components, mounting areas, radiator, and wiring. The left headlamp assembly is missing, while the right headlamp has a damaged lens with displaced or exposed surrounding trim and mounting components. The left front fender and adjacent body panels are torn, deformed, and irregular around the headlamp, bumper opening, wheel arch, and hood edge. The driver, front passenger, and left-side curtain airbags are deployed. Curtain-airbag fabric is hanging along the left roofline and side-window area. The driver’s seat cushion and outer bolster also have large tears with missing or separated upholstery material. Additional rear damage is visible. The lower section of the trunk lid around the license-plate recess is creased, scraped, and uneven, and the rear bumper cover has broad abrasion and scraping along its center and lower edge. The visible findings indicate major front-end collision damage with multiple missing exterior and lighting components, deployed airbags, and additional interior and rear-body damage. The available findings do not establish the condition of concealed structural, mechanical, cooling, electrical, or restraint-system components, which would require physical inspection.