2018 MERCEDES-BENZ C 300 C300

The 2018 Mercedes-Benz C 300 is listed with a clear auction condition and “Front End” as the primary damage code. However, Stage 1 reports that the visible evidence contradicts the “Clear” title condition because substantial front-end damage is present, while supporting the listed Front End damage classification. The front bumper cover, main grille, and left headlamp assembly are missing. The bumper reinforcement, radiator area, internal front support, mounting structures, and lower front components are exposed. Front-corner bumper and lower trim pieces are also absent or broken on both sides, with exposed mounting points and loose or damaged plastic components. The hood is creased and deformed along its front edge, particularly at the left front corner, with an uneven gap above the exposed front assembly. Scratches and scuff marks are visible on the hood. The right rear bumper has light-colored vertical scuffing and paint-transfer marks. Inside the vehicle, the driver’s seat outer lower bolster has a visible tear or abrasion with lighter-colored material exposed. The VIN decodes this vehicle as a Mercedes-Benz C-Class C300 sedan with a 2.0-liter turbocharged gasoline four-cylinder engine, automatic nine-speed transmission, and production in South Africa. The decoding data does not identify a drivetrain. The provided NHTSA recall records include multiple campaigns associated with 2018 C300 vehicles or related C-Class configurations. These concern communication-module software and emergency calling, front seat-belt retraction, headlight adjustment or replacement, roof-panel bonding on vehicles equipped with a panoramic sunroof, passenger air-bag status display, steering components on specified configurations, 12-volt battery mounting or electrical protection, and rear-window bonding. Some recalls are configuration-specific, so recall completion and exact applicability should be confirmed with Mercedes-Benz or an authorized dealer using the VIN. Because of the visible front-end damage, the headlamp-related recalls and the condition of the restraint and safety systems should receive particular attention during inspection. A complete physical inspection is recommended before purchase, including the front structural components, cooling system, lighting, wiring, steering and suspension, air-bag and restraint systems, battery protection, alignment, and any damage concealed behind the missing exterior components.