2018 MERCEDES-BENZ C 300 C300

The vehicle is listed by the auction as having a salvage condition and “Front End” as its primary damage. These are unverified auction designations. Stage 1 reports that the visible extensive front-end damage supports the unverified “Front End” claim, while the salvage-title status cannot be confirmed from photographs. The most significant damage is at the front. The hood is severely deformed, with a wide, uneven gap along the front and side edges and a raised leading edge. The front bumper cover has extensive scraping, torn and open sections, missing material at both lower corners, and separation from adjacent body panels. The headlamp assemblies are damaged and displaced, with exposed mounting areas and broken or missing outer sections. Both front fenders near the wheel arches show deformation, scraped paint, and exposed underlying material. The front corner and lower grille areas also have extensive abrasion, torn openings, and visible panel separation. Additional collision damage is visible at the rear. The left rear quarter panel and wheel-arch area have moderate deformation, scraped paint, and exposed lighter-colored material. The rear bumper covers show scuffing, including extensive dark horizontal and irregular marks with areas of scraped red paint on the right rear corner and lower section, as well as lighter surface scuffing elsewhere. A yellow engine-shaped warning indicator is illuminated on the instrument cluster. The underlying fault is not identified in the provided findings and should be diagnosed before purchase. The condition of hidden structural, cooling, suspension, steering, restraint, lighting, and electrical components cannot be determined from these findings; a comprehensive physical inspection and diagnostic scan are recommended before any road use or repair estimate is finalized. VIN decoding identifies this vehicle as a 2018 Mercedes-Benz C-Class C300 sedan with a 2.0-liter turbocharged gasoline four-cylinder M274 engine, a seven-speed automatic transmission, and approximately 241 horsepower. The vehicle was manufactured by Mercedes-Benz Cars in Vance, Alabama. NHTSA records list multiple recalls associated with applicable 2018 C300 vehicles, including issues involving emergency-call communication software, front seat-belt retraction, headlight adjustment, occupant-classification software, the battery mounting bracket and positive-terminal cover, rear-window bonding, and, for vehicles with a panoramic sunroof, front roof-panel bonding. Additional recalls may depend on the vehicle’s exact body style, drivetrain, equipment, and production details. Recall completion should be verified by VIN with Mercedes-Benz or NHTSA before purchase, particularly because the front lighting and electrical systems are affected by the visible damage.