2017 MERCEDES-BENZ C 300 C300

The auction record lists the vehicle’s condition as “Clear” and its primary damage as “Front End.” Stage 1 reports that the visible front bumper damage—including a missing cover, scuffing, and paint loss—supports the Front End classification. The visible damage does not support interpreting the “Clear” condition as meaning the vehicle is damage-free; title status cannot be verified from the provided photos. The identified exterior damage is concentrated mainly around the bumpers. A small circular cover is missing from the left side of the front bumper, while the lower front bumper has chipped areas and paint loss along its edge and lower corners. Several dark scuff marks are also visible on the right side of the front bumper near the wheel opening. Additional minor surface marks are present on the lower-middle portions of the side doors, above and behind the rear wheel arch, and across the rear bumper. Inside, the front passenger seat has a long open tear along the outer section of its light-colored seat cushion. According to the VIN decode, this is a 2017 Mercedes-Benz C-Class C 300 sedan with a 2.0-liter turbocharged four-cylinder gasoline engine, a seven-speed automatic transmission, and left-hand drive. The vehicle was manufactured in the United States. Factory-listed equipment includes standard front and side-curtain air bags, electronic stability control, traction control, forward collision warning, blind-spot monitoring, and a rear visibility system. No mechanical or structural condition can be confirmed from the listed findings; a physical inspection is recommended, particularly for the front-end area.