2016 MERCEDES-BENZ C 300 C300

The auction record lists the vehicle as salvage with “All Over” primary damage. Stage 1’s photo-based assessment states that the visible rear component damage could support a salvage designation, but the provided photos do not support an all-over or rollover damage pattern; the roof, glass, and most side panels appear substantially intact. The documented exterior damage is concentrated mainly at the rear. Both left and right rear tail-lamp assemblies are missing, leaving the lamp cavities, mounting points, and wiring areas exposed. The lower trunk-lid trim is also missing, with mounting clips and an unfinished edge visible. The rear bumper cover has surface scuffing and dark marks beneath its transparent protective covering. Multiple light scratches and scuff marks are present on the upper and lower trunk-lid surfaces. The right rear quarter panel is missing its fuel-filler door, exposing the filler-door recess and an internal black component. Minor cosmetic scuffing is visible on the lower front bumper, including near the right-side air intake. The VIN decodes this vehicle as a 2016 Mercedes-Benz C-Class C300 sedan, manufactured by Mercedes-Benz Cars in the United States. It is equipped with a 2.0-litre, four-cylinder gasoline engine. The decoder identifies front-row driver and passenger airbags, side airbags for the first and second rows, load-limiting pretensioned seat belts for outboard occupants, and direct tire-pressure monitoring. Mechanical operation, structural condition, electrical systems, and the extent of any damage not visible in the provided findings require physical inspection.