2016 MERCEDES-BENZ C 300 C300

The auction record lists the vehicle as having a salvage condition and identifies “Right Side” as the primary damage. Stage 1 reports that the visible damage is concentrated on the near-side/left-side panels and the front bumper, with no comparable right-side damage visible. This contradicts the stated “Right Side” primary-damage code. Stage 1 also states that the generic salvage title status cannot be independently confirmed from exterior photographs. Visible damage includes cracks and a torn opening in the lower center of the front bumper cover, along with a missing central Mercedes grille emblem. The near-side/left front fender is severely creased and crushed around the rear edge of the wheel arch, with damaged panel edges extending toward the rocker area. The adjacent rocker panel and side skirt are deformed, scuffed, and damaged behind the front wheel. Both visible near-side/left-side doors have substantial dents and sharp creases across their lower and middle sections. The front door also has paint scuffing along the lower area, while the rear door has a horizontal crease and localized scuffs. The findings indicate collision-related exterior panel damage; the condition of the underlying structural components, suspension, wheel alignment, safety systems, and mechanical systems is not established by these findings and should be verified through a physical inspection. VIN decoding identifies this vehicle as a 2016 Mercedes-Benz C-Class C300 sedan with a 2.0-liter, four-cylinder gasoline engine. The vehicle was manufactured by Mercedes-Benz Cars in Vance, Alabama, USA. The decoded data does not specify the drivetrain or transmission.